Unilumin Umesh F-M
Outdoor transparent media-façade cabinets: three factory models from 3.9/7.8 to 10.4 mm pitch.
Selected: F-M3A · P3.9×7.8TOUCHLED cover with the selected variant code. The manufacturer photo represents the series, not visual differences between variants.
Purpose and capabilities
Factory-assembled LED cabinet for building a display. Outdoor transparent media-façade cabinets: three factory models from 3.9/7.8 to 10.4 mm pitch. Common 1000 × 500 × 81.5 mm housing, IP65 and 16 kg/m² mass. The table lists optional brightness configurations; confirm the exact option in the order.
Where it is used
Transparent façades and outdoor advertising that need visibility through the display and front service.
Signal path
Cabinet with factory-fitted LED modules. Do not count those modules again; include power and receiver only according to the selected series' confirmed package.
Check before selecting
This is an assembly unit, not a complete display with fixed dimensions. Controller compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model code | |
| Pixel pitch |
Construction
| Parameter | Value |
|---|---|
| Cabinet dimensions, mm | 1000×500×81.5Source · Таблица параметров / Specifications |
| Service access | Front and rearSource · Таблица параметров / Specifications |
| Ingress protection |
Image
| Parameter | Value |
|---|---|
| Brightness, nits | 5000/6500Value depends on the brightness configuration.Source · Таблица параметров / Specifications |
| Refresh rate, Hz | |
| Grayscale depth | |
| Viewing angle | |
| Transparency |
Power and operation
| Parameter | Value |
|---|---|
| Maximum power, W/m² |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
QSTECH EG56
Conditions must be checked in the documentation.
QSTECH B71HD
Conditions must be checked in the documentation.
QSTECH B7120
Conditions must be checked in the documentation.
Unilumin XF
Conditions must be checked in the documentation.
Before confirming a project
- Cabinet pixel grid, pinout and exact brightness configuration
- Exact package and controller for the project
- Confirmed price, availability and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
