Unilumin XF
Floor LED system for stages and interactive spaces, with two factory variants and individual cabinet geometry and mass.
Series photoSelected: XF2.6 · P2.6Illustration of XF2.6 from published dimensions. The photograph represents the series; confirm the exact model appearance with the manufacturer.
Purpose and capabilities
Factory-assembled LED cabinet for building a display. Floor LED system for stages and interactive spaces, with two factory variants and individual cabinet geometry and mass. The maker states up to 2.5 t/m² surface capacity, IP65 and redundancy. Support structure and site loads require a separate engineering check.
Where it is used
Concerts, XR stages, exhibitions and interactive floors.
Signal path
Cabinet with factory-fitted LED modules. Do not count those modules again; include power and receiver only according to the selected series' confirmed package.
Check before selecting
This is an assembly unit, not a complete display with fixed dimensions. Controller compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model code | |
| Pixel pitch |
Construction
| Parameter | Value |
|---|---|
| Cabinet dimensions, mm | |
| Cabinet weight, kg | |
| Ingress protection |
Image
| Parameter | Value |
|---|---|
| Brightness, nits | |
| Refresh rate, Hz | |
| Grayscale depth |
Power and operation
| Parameter | Value |
|---|---|
| Published floor load, kg/m² | 2500XF series claim; calculate the support structure separately.Source · Таблица параметров / Specifications |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
QSTECH W44
Conditions must be checked in the documentation.
QSTECH W28
Conditions must be checked in the documentation.
Unilumin UKY
Conditions must be checked in the documentation.
Unilumin UGN II
Conditions must be checked in the documentation.
Before confirming a project
- Exact package and controller for the project
- Confirmed price, availability and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
