QSTECH EG56
Outdoor cabinet system with IP66 protection, front/rear service and configuration-dependent brightness.
Series photoSelected: DEG5639 · P3.9 · 1000×750Illustration of DEG5639 from published dimensions. The photograph represents the series; confirm the exact model appearance with the manufacturer.
Purpose and capabilities
Factory-assembled LED cabinet for building a display. Outdoor cabinet system with IP66 protection, front/rear service and configuration-dependent brightness. Two cabinet heights, 750 and 1000 mm. The selected height and brightness must be fixed in the project specification.
Where it is used
Facades, outdoor media screens and high-ambient-light projects.
Signal path
Cabinet with factory-fitted LED modules. Do not count those modules again; include power and receiver only according to the selected series' confirmed package.
Check before selecting
This is an assembly unit, not a complete display with fixed dimensions. Controller compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model code | DEG5639The TOUCHLED SKU suffix identifies cabinet format; the factory model name is unchanged.Source · Таблица параметров / Specifications |
| Pixel pitch |
Construction
| Parameter | Value |
|---|---|
| Cabinet dimensions, mm | 1000×750×68Source · Таблица параметров / Specifications |
| Cabinet weight, kg | |
| Service access | Front and rearSource · Таблица параметров / Specifications |
| Ingress protection |
Image
| Parameter | Value |
|---|---|
| Brightness, nits | 5000/6000Value depends on the brightness configuration.Source · Таблица параметров / Specifications |
| Refresh rate, Hz | |
| Contrast ratio |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
QSTECH CX27
Conditions must be checked in the documentation.
QSTECH FX27
Conditions must be checked in the documentation.
QSTECH CM27
Conditions must be checked in the documentation.
QSTECH D27
Conditions must be checked in the documentation.
Before confirming a project
- Exact package and controller for the project
- Confirmed price, availability and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
