QSTECH V27
Energy-efficient indoor SMD range in a 610 × 343 mm cabinet.
Series photoSelected: FP-I 1270 · P1.2Illustration of FP-I 1270 from published dimensions. The photograph represents the series; confirm the exact model appearance with the manufacturer.
Purpose and capabilities
Factory-assembled LED cabinet for building a display. Energy-efficient indoor SMD range in a 610 × 343 mm cabinet. Four P1.2–P2.5 variants in a 31 mm cabinet. The first variant's brightness is configuration-dependent.
Where it is used
Permanent corporate and commercial displays.
Signal path
Cabinet with factory-fitted LED modules. Do not count those modules again; include power and receiver only according to the selected series' confirmed package.
Check before selecting
This is an assembly unit, not a complete display with fixed dimensions. Controller compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model code | |
| Pixel pitch |
Construction
| Parameter | Value |
|---|---|
| Cabinet dimensions, mm | |
| Cabinet weight, kg |
Image
| Parameter | Value |
|---|---|
| Brightness, nits | 550/1000Value depends on the brightness configuration.Source · Таблица параметров / Specifications |
| Refresh rate, Hz | |
| Contrast ratio |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
QSTECH CX27
Conditions must be checked in the documentation.
QSTECH FX27
Conditions must be checked in the documentation.
QSTECH EG56
Conditions must be checked in the documentation.
QSTECH CM27
Conditions must be checked in the documentation.
Before confirming a project
- Exact package and controller for the project
- Confirmed price, availability and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
