QSTECH FX27
Slim 16:9 indoor LED cabinet with front service and four P1.2–P2.5 factory variants.
Series photoSelected: DFX2712 · P1.2Illustration of DFX2712 from published dimensions. The photograph represents the series; confirm the exact model appearance with the manufacturer.
Purpose and capabilities
Factory-assembled LED cabinet for building a display. Slim 16:9 indoor LED cabinet with front service and four P1.2–P2.5 factory variants. 600 × 337.5 × 31 mm and 4 kg cabinet. Power, receiving card and hub are integrated; QSTECH describes a PWM driver, 170° viewing angle and calibration memory on the LED board. Wireless casting requires an optional factory system.
Where it is used
Meeting rooms, education and exhibitions where shallow depth and front service matter.
Signal path
Cabinet with factory-fitted LED modules. Do not count those modules again; include power and receiver only according to the selected series' confirmed package.
Check before selecting
This is an assembly unit, not a complete display with fixed dimensions. Controller compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model code | |
| Pixel pitch |
Construction
| Parameter | Value |
|---|---|
| Cabinet dimensions, mm | 600×337.5×31Source · Таблица параметров / Specifications |
| Cabinet weight, kg | |
| Service access |
Image
| Parameter | Value |
|---|---|
| Brightness, nits | |
| Refresh rate, Hz | |
| Contrast ratio | |
| Viewing angle |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
QSTECH CX27
Conditions must be checked in the documentation.
QSTECH EG56
Conditions must be checked in the documentation.
QSTECH CM27
Conditions must be checked in the documentation.
QSTECH D27
Conditions must be checked in the documentation.
Before confirming a project
- Exact package and controller for the project
- Confirmed price, availability and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
