QSTECH SP72
Outdoor LED cabinets for stadium perimeters and spectator areas.
Series photoSelected: SP-S 6250S · P6.2Illustration of SP-S 6250S from published dimensions. The photograph represents the series; confirm the exact model appearance with the manufacturer.
Purpose and capabilities
Factory-assembled LED cabinet for building a display. Outdoor LED cabinets for stadium perimeters and spectator areas. Three unambiguous 1600 × 960 × 120 mm variants. A fourth factory row conflicts with series geometry and is not published as an SKU.
Where it is used
Sports arenas and LED perimeter boards.
Signal path
Cabinet with factory-fitted LED modules. Do not count those modules again; include power and receiver only according to the selected series' confirmed package.
Check before selecting
This is an assembly unit, not a complete display with fixed dimensions. Controller compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model code | |
| Pixel pitch |
Construction
| Parameter | Value |
|---|---|
| Cabinet dimensions, mm | 1600×960×120Source · Таблица параметров / Specifications |
| Cabinet weight, kg | |
| Service access | Front and rearSource · Таблица параметров / Specifications |
| Ingress protection |
Image
| Parameter | Value |
|---|---|
| Brightness, nits | |
| Refresh rate, Hz | |
| Contrast ratio |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
QSTECH CX27
Conditions must be checked in the documentation.
QSTECH FX27
Conditions must be checked in the documentation.
QSTECH EG56
Conditions must be checked in the documentation.
QSTECH CM27
Conditions must be checked in the documentation.
Before confirming a project
- Exact package and controller for the project
- Confirmed price, availability and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
