Unilumin UKY
Preassembled 320 × 480 mm indoor display system with integrated power, receiving card and interconnect.
Series photoSelected: UKY-P1.8 · P1.8Illustration of UKY-P1.8 from published dimensions. The photograph represents the series; confirm the exact model appearance with the manufacturer.
Purpose and capabilities
Factory-assembled LED cabinet for building a display. Preassembled 320 × 480 mm indoor display system with integrated power, receiving card and interconnect. 320 × 240 mm module. The factory provides power figures for P1.8, P2 and P2.5 separately. Power, receiving card and hub are integrated and must not be counted twice.
Where it is used
Classrooms, conference rooms and installations needing fast setup and front access.
Signal path
Cabinet with factory-fitted LED modules. Do not count those modules again; include power and receiver only according to the selected series' confirmed package.
Check before selecting
This is an assembly unit, not a complete display with fixed dimensions. Controller compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model code | |
| Pixel pitch |
Construction
| Parameter | Value |
|---|---|
| Cabinet dimensions, mm | |
| Cabinet weight, kg | |
| LED module dimensions, mm | |
| Service access | Front and rearSource · Таблица параметров / Specifications |
| Ingress protection |
Image
| Parameter | Value |
|---|---|
| Brightness, nits | |
| Viewing angle |
Power and operation
| Parameter | Value |
|---|---|
| Maximum power, W/m² | |
| Average power, W/m² |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
QSTECH CX27
Conditions must be checked in the documentation.
QSTECH FX27
Conditions must be checked in the documentation.
QSTECH CM27
Conditions must be checked in the documentation.
QSTECH D27
Conditions must be checked in the documentation.
Before confirming a project
- Exact pixel grid and UKY revision sheet for port assignment
- Exact package and controller for the project
- Confirmed price, availability and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
