3×2.5 power jumper · 75 cm
75 cm power jumper for planned LED cabinet wiring.
- Length
- 75 cm
Purpose and capabilities
The supplier lists a 75 cm lead marked “3×2.5” under article SP-32575. That marking is not a conductor, insulation or current-rating certificate. Check terminals, circuit protection and the display wiring plan before installation.
Where it is used
Short power link within a cabinet or between adjacent sections under an approved wiring plan.
Signal path
Verify the actual batch marking, terminals, route length and circuit protection.
Check before selecting
Rated current, voltage, conductor material and insulation class are unpublished. Mains use requires separate verification.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Variant and interface
| Parameter | Value |
|---|---|
| Exact model | SP-32575Source |
| Cable marking | 3×2.5Supplier title marking; not a conductor or current specification.Source |
Dimensions and supply
| Parameter | Value |
|---|---|
| Length | 75 cmSource |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Before confirming a project
- Cable datasheet and current rating
- TOUCHLED stock and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
