Unilumin FFP flexible LED modules
Six flexible indoor variants with exact pixel grids and front service.
Series photoSelected: FFP1.25 · P1.25 · flexibleFFP1.25 illustration: dot density is schematic. The photo represents the series, not the exact variant.
Purpose and capabilities
Flexible indoor FFP modules. The manufacturer table lists six exact P1.25–P3.076 variants, each with 320 × 160 mm dimensions, pixel grid, front service and 4200 Hz refresh. The silicone base supports curved surfaces. Supply voltage, pinout and final structure radius need an exact-revision specification.
Where it is used
Curved indoor LED displays
Signal path
Use in a curved assembly after power wiring and mount verification.
Check before selecting
The factory states a series bend range; structural radius and mounts require design review. Exact-revision voltage, power and pinout are unpublished.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model | FFP1.25Source |
| Pixel pitch | P1.25Source |
Construction
| Parameter | Value |
|---|---|
| Module size | 320 × 160 mmSource |
| Pixel grid | 256 × 128 pxSource |
| Flexible assembly angle | 0–360°Source |
| Service access | FrontSource |
Image
| Parameter | Value |
|---|---|
| Refresh rate | 4200 HzSource |
Consumption and supply
| Parameter | Value |
|---|---|
| Estimated module power | ≈ 52 W · estimateCalculated valueTOUCHLED estimate: 0.051200 m² × 800 W/m² × 1.25, rounded up to 52 W. Density is a planning assumption; 25% is uncertainty margin, not a factory maximum. 5 V is an assumed planning voltage, not a wiring instruction; obtain the revision specification. No average consumption is assumed. |
| Module average consumption | No dataData to be confirmedDepends on content and brightness. No fixed fraction of peak power is assumed. |
| Module supply | 5 V · assumedCalculated valueAssumption for preliminary PSU sizing. Verify the exact revision's voltage before wiring. |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
Unilumin UM LED modules
Conditions must be checked in the documentation.
Before confirming a project
- Voltage, power, pinout and mounting radius
- Price and availability
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
1Official FFP module table · Chinese
ZH
