Showtechled R4
Rental range with indoor and outdoor 500×500 mm cabinets. Six exact codes have separate pixel grids and power ratings.
Series photoSelected: R4-2.6I · P2.604Illustration of R4-2.6I from published dimensions. The photograph represents the series; confirm the exact model appearance with the manufacturer.
Purpose and capabilities
Factory-assembled LED cabinet for building a display. Rental range with indoor and outdoor 500×500 mm cabinets. Six exact codes have separate pixel grids and power ratings. Magnetic front module service is optional; rear access is built in. Outdoor variants are rated IP65 at the front and IP54 at the back.
Where it is used
Stages, temporary advertising and event screens with straight or curved assemblies.
Signal path
Cabinet with factory-fitted LED modules. Do not count those modules again; include power and receiver only according to the selected series' confirmed package.
Check before selecting
This is an assembly unit, not a complete display with fixed dimensions. Controller compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model code | |
| Pixel pitch | |
| Cabinet resolution |
Construction
| Parameter | Value |
|---|---|
| Cabinet dimensions, mm | |
| Cabinet weight, kg | |
| LED module dimensions, mm | |
| LED module resolution | |
| Service access | RearMagnetic front module access is optional.Source · Таблица параметров / Specifications |
| Ingress protection |
Image
| Parameter | Value |
|---|---|
| Brightness, nits | |
| Refresh rate, Hz | |
| Scan mode | |
| Viewing angle |
Power and operation
| Parameter | Value |
|---|---|
| Maximum power, W/m² | |
| Average power, W/m² |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
Unilumin UGN II
Conditions must be checked in the documentation.
Unilumin UGM II Indoor
Conditions must be checked in the documentation.
Unilumin UGM II Outdoor
Conditions must be checked in the documentation.
Leyard CLI-M4
Conditions must be checked in the documentation.
Before confirming a project
- Exact package and controller for the project
- Confirmed price, availability and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
