Qiangli Jucai S Plus JX Indoor
indoor full-colour LED module. For indoor LED displays using the JX line.
Series photoSelected: S1.2Illustration of S1.2; the photo on the right shows the series. Confirm the exact variant appearance.
Purpose and capabilities
indoor full-colour LED module. For indoor LED displays using the JX line. The JX description states 6000 Hz refresh; confirm the project mode when selecting equipment.
Selecting a variant
The series lists 6 variants. Specify the pixel pitch and installation conditions when enquiring. Mounting, control, power and package contents must be checked for the exact model.
What the system includes
Select the system and connections after checking the module, cabinet, power and controller.
Exact variant specifications, compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Variant | |
| Nominal pitch | |
| Listed pixel pitches | 1.2 / 1.5 / 1.8 / 2 / 2.5 / 3.0 mmSeries variants; not one product's specification.Source · 产品型号 |
| Series variants | S1.2 · S1.5 · S1.8 · S2 · S2.5 · S3.0Source · 产品型号 |
Construction
| Parameter | Value |
|---|---|
| Module size | 320 × 160 mmCalculated valuePlanning size inferred from a related range; the factory series page does not state this board size. |
| Pixel grid | 256 × 128 pxCalculated valuePlanning estimate from the series format; confirm the exact revision's pixel grid with the factory. |
Consumption and supply
| Parameter | Value |
|---|---|
| Estimated module power | ≈ 52 W · estimateCalculated valueTOUCHLED estimate: 0.051200 m² × 800 W/m² × 1.25, rounded up to 52 W. Density is a planning assumption; 25% is uncertainty margin, not a factory maximum. Series voltage is published; verify revision. No average consumption is assumed. |
| Module average consumption | No dataData to be confirmedDepends on content and brightness. No fixed fraction of peak power is assumed. |
| Module supply | 4.2 VPublished for the series. Match the module revision before ordering.Source |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
qiangli-r-h-flex
Conditions must be checked in the documentation.
qiangli-r-pro-flex
Conditions must be checked in the documentation.
qiangli-bevel-edge
Conditions must be checked in the documentation.
qiangli-indoor-mono-dual
Conditions must be checked in the documentation.
Before confirming a project
- Full selected-variant specification
- Confirmed configuration and price
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
1Official series page · Chinese
ZH
Manufacturer series page. Request the full specification for the exact variant separately.