Qiangli Jucai Q Pro Indoor
indoor full-colour LED module. For indoor displays whose pixel pitch is selected for viewing distance and resolution.
Series photoSelected: Q0.9Illustration of Q0.9; the photo on the right shows the series. Confirm the exact variant appearance.
Purpose and capabilities
indoor full-colour LED module. For indoor displays whose pixel pitch is selected for viewing distance and resolution. The Pro series description lists high refresh and a PWM-SS driver; check the exact mode by variant.
Selecting a variant
The series lists 11 variants. Specify the pixel pitch and installation conditions when enquiring. Mounting, control, power and package contents must be checked for the exact model.
What the system includes
Select the system and connections after checking the module, cabinet, power and controller.
Exact variant specifications, compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Variant | |
| Nominal pitch | |
| Listed pixel pitches | 0.9 / 1.2 / 1.3 / 1.5 / 1.6 / 1.8 / 2 / 2.5 / 3 / 3.0 / 4 mmSeries variants; not one product's specification.Source · 产品型号 |
| Series variants | Q0.9 · Q1.2 · Q1.3 · Q1.5 · Q1.6 · Q1.8 · Q2 · Q2.5 · Q3 · Q3.0 · Q4Source · 产品型号 |
Construction
| Parameter | Value |
|---|---|
| Module size | |
| Pixel grid |
Consumption and supply
| Parameter | Value |
|---|---|
| Estimated module power | ≈ 52 W · estimateCalculated valueTOUCHLED estimate: 0.051200 m² × 800 W/m² × 1.25, rounded up to 52 W. Density is a planning assumption; 25% is uncertainty margin, not a factory maximum. Exact DC rail currents/topology required; no automatic PSU. No average consumption is assumed. |
| Module average consumption | No dataData to be confirmedDepends on content and brightness. No fixed fraction of peak power is assumed. |
| Module supply | 2.8 + 3.8 V · dual railTwo independent rails. PSU selection requires current ratings for each rail.Source |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
qiangli-r-h-flex
Conditions must be checked in the documentation.
qiangli-r-pro-flex
Conditions must be checked in the documentation.
qiangli-bevel-edge
Conditions must be checked in the documentation.
qiangli-indoor-mono-dual
Conditions must be checked in the documentation.
Before confirming a project
- Full selected-variant specification
- Confirmed configuration and price
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
3Official series page · Chinese
ZH
Manufacturer series page. Request the full specification for the exact variant separately.
Factory Q0.9 Pro MiP table · p. 54
Manufacturer series page. Request the full specification for the exact variant separately.
Q2.5 Pro · 32S-Pro-2020 · specification pp. 1–3 (manufacturer document, supplier-hosted translation)
Manufacturer series page. Request the full specification for the exact variant separately.