NovaStar VX600 Pro
Video processing and LED data output in one device.
- Published maximum load
- 3,900,000 px
- LED Ethernet outputs
- 6 ports
Purpose and capabilities
VX600 Pro combines a video processor and sending device. Input format, total and per-port load, colour depth, redundancy and required software version must be verified for each project.
- 01A single control point for processing and sending the image.
- 02Input and LED output limits are presented separately.
Where it is used
Processes video for display systems. Compare inputs, processing features and output types; not every processor includes LED sending.
Signal path
- 01Video sources
- 02processing
- 03LED sending
- 04receiving cards
- 05LED modules
Check before selecting
Verify the exact hardware revision, firmware and complete signal chain. Maximum specifications do not guarantee simultaneous operation of all features. Catalogue inclusion does not confirm stock or rental availability.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Capacity modes
Not a ready engineering mode. Frame rate, bit depth, redundancy, 3D and port mapping conditions are not fully confirmed.
Model specification · V1.4.0Performance
| Parameter | Value |
|---|---|
| Published maximum load | 3,900,000 pxPublished value. See the specification for operating mode and limits; project verification is required.Source · V1.4.0 · 简介 / Introduction |
| LED Ethernet outputs | |
| Maximum HDMI 2.0 input | 4096 × 2160 @ 60 HzSource · V1.4.0 · 简介 / 特性 / 接口 — Introduction / Features / Interfaces |
Interfaces
| Parameter | Value |
|---|---|
| Video inputs | 1 × HDMI 2.0 IN/LOOP; 2 × HDMI 1.3; 1 × 3G-SDI IN/LOOP; OPT 1Source · V1.4.0 · 简介 / 特性 / 接口 — Introduction / Features / Interfaces |
| Control network | 2 × EthernetFor configuration and firmware updates; these are not LED data outputs.Source · V1.4.0 · 简介 / 特性 / 接口 — Introduction / Features / Interfaces |
| Optical ports | 2 portsOPT 1 can be input or output. OPT 2 copies or backs up Ethernet outputs; it does not provide independent additional loading capacity.Source · V1.4.0 · 简介 / 特性 / 接口 — Introduction / Features / Interfaces |
Physical
| Parameter | Value |
|---|---|
| Dimensions | 482.6mm × 302.2mm × 50.1mmSource · V1.4.0 · 规格参数 / Specifications |
| Software mentioned in introduction | NovaLCT, UnicoCompatibility depends on software and firmware versions.Source · V1.4.0 · 简介 / Introduction |
Additional parameters
| Parameter | Value |
|---|---|
| Maximum width | 10,240 pxPublished value. See the specification for operating mode and limits; project verification is required.Source · V1.4.0 · 简介 / Introduction |
| Maximum height | 8,192 pxPublished value. See the specification for operating mode and limits; project verification is required.Source · V1.4.0 · 简介 / Introduction |
| Maximum layer resources | 6 layersPublished value. See the specification for operating mode and limits; project verification is required.Source · V1.4.0 · 简介 / Introduction |
| Rated power | |
| Load per LED output | 650,000 px8-bit output. Verify frame rate, 3D, redundancy and loading calculation for the selected mode.Source · V1.4.0 · 简介 / 特性 / 接口 — Introduction / Features / Interfaces |
| USB media playback | H.264 3840×2160@30; H.265 3840×2160@60USB source output is fixed at 1920×1080@60. Decoding capacity is not the output resolution.Source · V1.4.0 · 简介 / 特性 / 接口 — Introduction / Features / Interfaces |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
NovaStar A10s Pro
Ethernet sending is present; receiver firmware, cabinet file and port layout remain unverified. · V1.2.0
EvidenceExact-specification examples
Preliminary selection; not an installation drawing
NovaStar A10s Pro
Sender: V1.4.0; receiver: V1.5.1. Mode, firmware, cabinet file, pinout and port routing are unapproved.
View modelAlternatives
For comparison, not a direct replacement without verification.
NovaStar VX2000 Pro
Compare specifications; not a verified replacement.
NovaStar VX1000 Pro
Compare specifications; not a verified replacement.
NovaStar VX400 Pro
Compare specifications; not a verified replacement.
Before confirming a project
- No approved pairing with a specific TOUCHLED LED module.
- Actual configuration, revision and firmware must be confirmed before supply.
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
4Specification · V1.4.0 · Chinese
ZH · V1.4.0
Manual · V1.4.1 · Chinese
ZH · V1.4.1
Document · V1.0.1 · Chinese
ZH · V1.0.1
Official software and firmware centre
This is the manufacturer's download centre, not a package selected for this SKU. Confirm version against hardware revision and the complete system before installing.
Software and firmware
6Related downloads from the official catalogue. Confirm version support for your SKU, revision and system before installation.
Unico_MAC_V2.7.1（MAC电脑桌面版）.pkg
V2.7.1
Unico_windows_V2.7.1（Windows电脑桌面版）.exe
V2.7.1
Unico_MAC_V2.1.9（MAC电脑桌面版）.pkg
V2.1.9
Unico_windows_V2.1.9（Windows电脑桌面版）.exe
V2.1.9
Unico-EC_c5pro_V2.1.1（C5 Pro控台版）.zip
V2.1.1
Unico-EC_c5_V2.1.1（C5控台版）.zip
V2.1.1
