NovaStar MCTRL660 PRO
Accepts a video source and sends data to an LED display system. For projects with a separate image source.
- LED Ethernet outputs
- 6 ports
- Maximum input format
- 1920 × 1200 @ 60 Hz
Purpose and capabilities
NovaStar MCTRL660 PRO. LED Ethernet outputs: 6 ports; Maximum input format: 1920 × 1200 @ 60 Hz. Accepts a video source and sends data to an LED display system. For projects with a separate image source.
- 01MCTRL660 PRO inputs and interfaces: 1 × 3G-SDI; 1 × HDMI 1.4a; 1 × SL-DVI.
- 02Pairing, firmware and module pinout must be checked for the project.
MCTRL660 PRO in the display system
NovaStar MCTRL660 PRO serves as a sending device in the signal chain. Published inputs and interfaces: 1 × 3G-SDI; 1 × HDMI 1.4a; 1 × SL-DVI. This page describes the exact MCTRL660 PRO variant; confirm package contents, hardware revision and availability before ordering.
Capacity and interfaces without hidden assumptions
Video source → sending device → compatible receiving cards → LED modules
What to verify before specifying
The factory specification documents this model, not every possible device pairing. An exact quote needs sending and receiving models, hardware revisions, firmware versions, hub pinout, module drivers and port plan. Until those are reviewed, the configurator keeps the chain preliminary.
- No approved pairing with a specific TOUCHLED LED module.
- Actual configuration, revision and firmware must be confirmed before supply.
Where it is used
Accepts a video source and sends data to an LED display system. For projects with a separate image source.
Signal path
- 01Video source
- 02sending device
- 03compatible receiving cards
- 04LED modules
Check before selecting
Verify the exact hardware revision, firmware and complete signal chain. Maximum specifications do not guarantee simultaneous operation of all features. Catalogue inclusion does not confirm stock or rental availability.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Performance
| Parameter | Value |
|---|---|
| LED Ethernet outputs | |
| Maximum input format | 1920 × 1200 @ 60 HzSource · V1.4.1 · 简介 / 特性 / 接口 — Introduction / Features / Interfaces |
Interfaces
| Parameter | Value |
|---|---|
| Video inputs | 1 × 3G-SDI; 1 × HDMI 1.4a; 1 × SL-DVISource · V1.4.1 · 简介 / 特性 / 接口 — Introduction / Features / Interfaces |
| Optical outputs |
Additional parameters
| Parameter | Value |
|---|---|
| Input bit depth | 8 / 10 / 12 bitDepends on input and mode; higher bit depth reduces available loading capacity.Source · V1.4.1 · 简介 / 特性 / 接口 — Introduction / Features / Interfaces |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
NovaStar A10s Pro
Sending mode is documented; receiver firmware and port layout remain unverified. · V1.4.0
EvidenceAlternatives
For comparison, not a direct replacement without verification.
NovaStar MCTRL4K
Compare specifications; not a verified replacement.
NovaStar MCTRL1600
Compare specifications; not a verified replacement.
NovaStar MCTRLR5
Compare specifications; not a verified replacement.
NovaStar MCTRL700
Compare specifications; not a verified replacement.
Before confirming a project
- No approved pairing with a specific TOUCHLED LED module.
- Actual configuration, revision and firmware must be confirmed before supply.
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
3Specification · V1.4.1 · Chinese
ZH · V1.4.1
Manual · V1.4.1 · Chinese
ZH · V1.4.1
Official software and firmware centre
This is the manufacturer's download centre, not a package selected for this SKU. Confirm version against hardware revision and the complete system before installing.
