NovaStar BR860 Pro
BR860 Pro is a BR-series receiving board for driving LED display modules. The specified dimensions are 492.0mm×166.0mm×23.1mm.
- Load formats in introduction
- 512×512@60Hz / 512×256@60Hz
Purpose and capabilities
NovaStar BR860 Pro is a BR-series receiving board. It receives data from a sending device and passes it to modules inside the cabinet. The first published load mode is 512×512@60Hz; other modes are listed separately in specifications. Selection also requires checking driver ICs, scan mode, pinout and firmware revision, not only resolution.
- 01Published load modes: 512×512@60Hz / 512×256@60Hz. They are alternative operating conditions, not additive capacity.
- 02Interface: the module interface defined by the chosen cabinet. Match the count and pinout to the cabinet hub board.
- 03Dimensions 492.0mm×166.0mm×23.1mm. Confirm mounting space, supply and cooling.
Where BR860 Pro fits
Use this model in LED cabinet designs requiring the module interface defined by the chosen cabinet. Compare adjacent cards by load, interface and dimensions; belonging to the same family alone does not make boards interchangeable.
Operating modes, not one headline number
The first published load mode is 512×512@60Hz; other modes are listed separately in specifications. The achievable limit for an installation depends on mode and screen components. The specification table retains the manufacturer's wording, conditions and document reference.
- Card interface: the module interface defined by the chosen cabinet.
- The manufacturer mentions NovaLCT; confirm the required version for the actual firmware.
- Specified dimensions: 492.0mm×166.0mm×23.1mm.
What to confirm before ordering
For BR860 Pro, obtain the cabinet wiring, module resolution and scan mode, driver IC, HUB pinout, card revision and firmware. Matching connector names and nominal resolution do not establish full-system compatibility.
Where it is used
Receives controller data and drives LED modules. Selection requires the actual module driver, scan mode and pinout.
Signal path
- 01Sending device
- 02receiving card
- 03interface board/HUB
- 04LED modules
Check before selecting
Verify the exact hardware revision, firmware and complete signal chain. Maximum specifications do not guarantee simultaneous operation of all features. Catalogue inclusion does not confirm stock or rental availability.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Capacity modes
Published value. See the specification for operating mode and limits; project verification is required.
Model specification · V1.1.0Published value. See the specification for operating mode and limits; project verification is required.
Model specification · V1.1.0Capacity and module interface
| Parameter | Value |
|---|---|
| Load formats in introduction | 512×512@60Hz / 512×256@60HzPublished value. See the specification for operating mode and limits; project verification is required.Source · V1.1.0 · 简介 / Introduction |
Mechanical and environment
| Parameter | Value |
|---|---|
| Dimensions | 492.0mm×166.0mm×23.1mmSource · V1.1.0 · 规格参数 / Specifications |
Additional parameters
| Parameter | Value |
|---|---|
| Software mentioned in introduction | NovaLCTCompatibility depends on software and firmware versions.Source · V1.1.0 · 简介 / Introduction |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
NovaStar BR462 Pro
Compare specifications; not a verified replacement.
NovaStar BR860
Compare specifications; not a verified replacement.
NovaStar RH460 Plus
Compare specifications; not a verified replacement.
NovaStar BR462 Plus
Compare specifications; not a verified replacement.
Before confirming a project
- No approved pairing with a specific TOUCHLED LED module.
- Actual configuration, revision and firmware must be confirmed before supply.
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
2Software and firmware
2Related downloads from the official catalogue. Confirm version support for your SKU, revision and system before installation.
NovaStar receiving-card firmware catalogue
ZH
Official page. Select a package only after confirming the exact model, hardware revision and software version.
NovaStar configuration software catalogue
ZH
Official catalogue. Match the application and version to the receiving card and controller.
