Leyard LN-C
Curved LN-C rental system with exact cabinet geometry, resolution and power listed by variant.
Series photoSelected: LN1.9-C · P1.95Illustration of LN1.9-C from published dimensions. The photograph represents the series; confirm the exact model appearance with the manufacturer.
Purpose and capabilities
Factory-assembled LED cabinet for building a display. Curved LN-C rental system with exact cabinet geometry, resolution and power listed by variant. 500 × 500 mm cabinet; 600/200 W/m² maximum/average power in the factory table.
Where it is used
Stages, immersive sets and wave or cylindrical screens.
Signal path
Cabinet with factory-fitted LED modules. Do not count those modules again; include power and receiver only according to the selected series' confirmed package.
Check before selecting
This is an assembly unit, not a complete display with fixed dimensions. Controller compatibility, package contents, price and availability require project confirmation.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Range and variant
| Parameter | Value |
|---|---|
| Factory model code | |
| Pixel pitch | |
| Cabinet resolution |
Construction
| Parameter | Value |
|---|---|
| Cabinet dimensions, mm |
Image
| Parameter | Value |
|---|---|
| Brightness, nits | |
| Refresh rate, Hz | ≥3840/≥7680Source · Таблица параметров / Specifications |
Power and operation
| Parameter | Value |
|---|---|
| Maximum power, W/m² | |
| Average power, W/m² |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Alternatives
For comparison, not a direct replacement without verification.
Unilumin UGN II
Conditions must be checked in the documentation.
Unilumin UGM II Indoor
Conditions must be checked in the documentation.
Unilumin UGM II Outdoor
Conditions must be checked in the documentation.
Leyard CLI-M4
Conditions must be checked in the documentation.
Before confirming a project
- Exact package and controller for the project
- Confirmed price, availability and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
