16-pin ribbon cable · 15 cm
Short ready-made ribbon cable for internal LED cabinet connections.
- Length
- 15 cm
- Contacts
- 16 pins
Purpose and capabilities
15 cm cable with 16-contact connectors for internal signal wiring. Verify contact pitch, keying, orientation and pinout before ordering or installation; matching contact count alone does not prove compatibility.
Where it is used
Short connection between matching boards inside an LED cabinet.
Signal path
Compare both connectors and conductor orientation with the original cable or board diagram.
Check before selecting
The supplier does not document pinout or contact pitch.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Variant and interface
| Parameter | Value |
|---|---|
| Contacts | 16 pinsSource |
Dimensions and supply
| Parameter | Value |
|---|---|
| Length | 15 cmSource |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Before confirming a project
- Pinout and contact pitch
- TOUCHLED stock
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.