Power jumper 3×2.5 · 15 cm
Short power jumper for LED cabinet wiring.
- Length
- 15 cm
Purpose and capabilities
15 cm power jumper with supplier marking “3×2.5”. The photograph shows free conductors; connector type, current rating and conductor material are not confirmed by a datasheet. Verify electrical ratings and wiring before use.
Where it is used
Short power wiring in an engineered LED cabinet.
Signal path
Check conductor size, insulation, terminals and protection against the project and actual batch.
Check before selecting
Do not assign a current rating or mains-voltage use from the product name alone.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Variant and interface
| Parameter | Value |
|---|---|
| Cable marking | 3×2.5Supplier title marking; electrical rating requires confirmation.Source |
Dimensions and supply
| Parameter | Value |
|---|---|
| Length | 15 cmSource |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Before confirming a project
- Cable datasheet and current rating
- TOUCHLED stock
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.