RJ45 patch cable · 1 m
Ready-made 1 m signal patch lead for an LED system.
- Length
- 1 m
- Connector
- RJ45 ↔ RJ45
Purpose and capabilities
One-metre RJ45 lead PCLRJ451. Cable category, shielding and test report are unpublished. Check the controller-to-receiver link requirements and permitted run length for the exact system.
Where it is used
Short link between compatible LED-system data ports.
Signal path
Check the port type, cable category and signal route.
Check before selecting
RJ45 alone does not establish Cat5e/Cat6 rating, pinout or suitability for every controller.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Variant and interface
| Parameter | Value |
|---|---|
| Exact model | PCLRJ451Source |
| Connector | RJ45 ↔ RJ45Source |
Dimensions and supply
| Parameter | Value |
|---|---|
| Length | 1 mSource |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Before confirming a project
- Cable category, shielding and test report
- TOUCHLED stock and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
