Mounting magnet 12×8×1.2 · 1000 pcs
Bulk magnets for module mounting after pull-force verification.
- Dimensions
- 12 × 8 × 1.2 mm
- Pack size
- 1,000 pcs
Purpose and capabilities
Supplier article М-1281212U measures 12×8×1.2 mm and comes in a 1,000-piece box. Pull force and matching fixings are unpublished. Qiangli's magnetic installation guidance requires a holding-force check, so this batch is not automatically approved for a module.
Where it is used
Spare module fixing after fit and holding-force checks.
Signal path
Confirm thread/fit, pull force and the exact module fixing plan.
Check before selecting
Dimensions do not establish holding force; do not infer quantity or compatibility from size.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Variant and interface
| Parameter | Value |
|---|---|
| Exact model | М-1281212USource |
Dimensions and supply
| Parameter | Value |
|---|---|
| Dimensions | 12 × 8 × 1.2 mmSource |
| Pack size | 1,000 pcsSource |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Before confirming a project
- Holding force and mounting drawing
- TOUCHLED stock and lead time
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.