Indoor wall display 4800 × 2880 P1.86
2580 × 1548 px · NovaStar VC10 · up to 6.21 kW
Interior visualization of this solution. Colours, finishes and surroundings are illustrative.
Purpose and capabilities
Reference indoor LED configuration for large halls and presentation spaces. 4800 × 2880 mm, P1.86, 2580 × 1548 px.
- 01Fixed geometry and raster: 4800 × 2880 mm, 2580 × 1548 px.
- 02NovaStar VC10 is specified for a 3,993,840-pixel display load.
- 03Power calculation: 48 PSUs, up to 6.21 kW, 2.0736 kW average.
What is already defined
The engineering sheet fixes display size, pitch, final raster, cabinet type, controller, PSU quantity and three electrical load figures. This configuration is the starting specification for large halls and presentation spaces.
- Display: 4800 × 2880 mm · 13.82 m².
- Image: P1.86 · 2580 × 1548 px.
- Configuration: Qiangli · 640 × 480 мм, фронтальный доступ.
Calculated complete-display load
The configuration uses NovaStar VC10 and 48 PSUs: 9.6 kW startup, 6.21 kW maximum and 2.0736 kW average load. Use these values for initial circuit planning; protection, cable size, headroom and phase distribution belong in the working design.
What the working design confirms
Before the final quotation, confirm exact module revisions and SKUs, receiving cards and PSUs, cabinet file, port map, cable schedule, support structure, ventilation and service method. The visuals communicate the finished installation but do not replace working drawings.
- The source sheet does not name the exact module SKU; the part number is required before ordering.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Variant and geometry
| Parameter | Value |
|---|---|
| Ready-solution SKU | TL-INT-009Source |
| Pixel pitch | P1.86Source |
| Display dimensions | 4800 × 2880 mmSource |
| Display area | 13.82 m²Calculated valueSource |
| Display aspect ratio | 5:3Calculated value |
| Display resolution | 2580 × 1548 pxSource |
| LED module brand | QiangliSource |
| Cabinet configuration | 640 × 480 mm, front serviceSource |
Image and environment
| Parameter | Value |
|---|---|
| Refresh rate | 6000 HzSource |
Operation
| Parameter | Value |
|---|---|
| Maximum load | 6.21 kWSource |
| Average load | 2.0736 kWSource |
| Startup load | 9.6 kWSource |
| Power supply quantity | 48 pcsSource |
| Control system | NovaStar VC10Source |
| Installation | Wall or recessed project installationSource |
| Service access | FrontSource |
| Calculation scope | 48 PSUs · 9.6 kW startup loadSource |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Before confirming a project
- Exact module SKU and factory revision
- Receiving-card and PSU models
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.