Indoor wall display 3840 × 1920 P1.538
2496 × 1248 px · NovaStar TU20 · up to 3.6 kW
Interior visualization of this solution. Colours, finishes and surroundings are illustrative.
Purpose and capabilities
Reference indoor LED configuration for meeting rooms, offices and public interiors. 3840 × 1920 mm, P1.538, 2496 × 1248 px.
- 01Fixed geometry and raster: 3840 × 1920 mm, 2496 × 1248 px.
- 02NovaStar TU20 is specified for a 3,115,008-pixel display load.
- 03Power calculation: 27 PSUs, up to 3.6 kW, 1.10592 kW average.
What is already defined
The engineering sheet fixes display size, pitch, final raster, cabinet type, controller, PSU quantity and three electrical load figures. This configuration is the starting specification for meeting rooms, offices and public interiors.
- Display: 3840 × 1920 mm · 7.37 m².
- Image: P1.538 · 2496 × 1248 px.
- Configuration: Dahua · 640 × 640 мм, фронтальный доступ.
Calculated complete-display load
The configuration uses NovaStar TU20 and 27 PSUs: 5.4 kW startup, 3.6 kW maximum and 1.10592 kW average load. Use these values for initial circuit planning; protection, cable size, headroom and phase distribution belong in the working design.
What the working design confirms
Before the final quotation, confirm exact module revisions and SKUs, receiving cards and PSUs, cabinet file, port map, cable schedule, support structure, ventilation and service method. The visuals communicate the finished installation but do not replace working drawings.
- The source sheet does not name the exact module SKU; the part number is required before ordering.
Where it is used
meeting rooms, control rooms and short viewing distances
Signal path
NovaStar TU20; 3,115,008 pixels. Port mapping and redundancy require approval before supply.
Check before selecting
Exact module, receiving-card and PSU models, cable schedule and port map are approved in the working design.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Variant and geometry
| Parameter | Value |
|---|---|
| Ready-solution SKU | TL-INT-008Source |
| Pixel pitch | P1.538Calculated valueSource |
| Display dimensions | 3840 × 1920 mmSource |
| Display area | 7.37 m²Calculated valueSource |
| Display aspect ratio | 2:1Calculated value |
| Display resolution | 2496 × 1248 pxSource |
| LED module brand | DahuaSource |
| Cabinet configuration | 640 × 640 mm, front serviceSource |
Image and environment
| Parameter | Value |
|---|---|
| Refresh rate | 6000 HzSource |
Operation
| Parameter | Value |
|---|---|
| Maximum load | 3.6 kWSource |
| Average load | 1.10592 kWSource |
| Startup load | 5.4 kWSource |
| Power supply quantity | 27 pcsSource |
| Control system | NovaStar TU20Source |
| Installation | Wall or recessed project installationSource |
| Service access | FrontSource |
| Calculation scope | 27 PSUs · 5.4 kW startup loadSource |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Before confirming a project
- Exact module SKU and factory revision
- Receiving-card and PSU models
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.