Reception display 2880 × 960 P1.25
2304 × 768 px · NovaStar MCTRL500 · up to 1.512 kW
Interior visualization of this solution. Colours, finishes and surroundings are illustrative.
Purpose and capabilities
Reference indoor LED configuration for reception, entrance and customer areas. 2880 × 960 mm, P1.25, 2304 × 768 px.
- 01Fixed geometry and raster: 2880 × 960 mm, 2304 × 768 px.
- 02NovaStar MCTRL500 is specified for a 1,769,472-pixel display load.
- 03Power calculation: 10 PSUs, up to 1.512 kW, 0.41472 kW average.
What is already defined
The engineering sheet fixes display size, pitch, final raster, cabinet type, controller, PSU quantity and three electrical load figures. This configuration is the starting specification for reception, entrance and customer areas.
- Display: 2880 × 960 mm · 2.76 m².
- Image: P1.25 · 2304 × 768 px.
- Configuration: Dahua · 640 × 480 / 320 × 480 мм, фронтальный доступ.
Calculated complete-display load
The configuration uses NovaStar MCTRL500 and 10 PSUs: 2 kW startup, 1.512 kW maximum and 0.41472 kW average load. Use these values for initial circuit planning; protection, cable size, headroom and phase distribution belong in the working design.
What the working design confirms
Before the final quotation, confirm exact module revisions and SKUs, receiving cards and PSUs, cabinet file, port map, cable schedule, support structure, ventilation and service method. The visuals communicate the finished installation but do not replace working drawings.
- The source sheet does not name the exact module SKU; the part number is required before ordering.
Where it is used
reception desks, entrance areas and customer spaces
Signal path
NovaStar MCTRL500; 1,769,472 pixels. Port mapping and redundancy require approval before supply.
Check before selecting
Exact module, receiving-card and PSU models, cable schedule and port map are approved in the working design.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Variant and geometry
| Parameter | Value |
|---|---|
| Ready-solution SKU | TL-INT-002Source |
| Pixel pitch | P1.25Source |
| Display dimensions | 2880 × 960 mmSource |
| Display area | 2.76 m²Calculated valueSource |
| Display aspect ratio | 3:1Calculated value |
| Display resolution | 2304 × 768 pxSource |
| LED module brand | DahuaSource |
| Cabinet configuration | 640 × 480 / 320 × 480 mm, front serviceSource |
Image and environment
| Parameter | Value |
|---|---|
| Refresh rate | 6000 HzSource |
Operation
| Parameter | Value |
|---|---|
| Maximum load | 1.512 kWSource |
| Average load | 0.41472 kWSource |
| Startup load | 2 kWSource |
| Power supply quantity | 10 pcsSource |
| Control system | NovaStar MCTRL500Source |
| Installation | Wall or recessed project installationSource |
| Service access | FrontSource |
| Calculation scope | 10 PSUs · 2 kW startup loadSource |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Before confirming a project
- Exact module SKU and factory revision
- Receiving-card and PSU models
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.