Huidu HD-K12
receiving card. Up to 98304 px · Factory specification; chain selection is preliminary.
Purpose and capabilities
Huidu HD-K12 is a receiving card. Preliminary planning capacity: up to 98304 pixels in the stated mode. 12×HUB75E. Full-chain compatibility requires an exact build review.
- 01HD-K12 inputs and interfaces: 12×HUB75E.
- 02Planning-mode capacity is 98304 pixels; another mode has a separate limit.
- 03Connection to the next stage: 12×HUB75E. Verify the routing.
HD-K12 in the display system
Huidu HD-K12 serves as a receiving card in the signal chain. Published inputs and interfaces: 12×HUB75E. Output: 12×HUB75E. This page describes the exact HD-K12 variant; confirm package contents, hardware revision and availability before ordering.
Capacity and interfaces without hidden assumptions
Preliminary selection uses 98304 pixels; other published modes have separate limits. Validate each output against frame rate, bit depth, operating mode and redundancy plan.
What to verify before specifying
The factory specification documents this model, not every possible device pairing. An exact quote needs sending and receiving models, hardware revisions, firmware versions, hub pinout, module drivers and port plan. Until those are reviewed, the configurator keeps the chain preliminary.
- Verified device pairing and firmware versions
- Port plan and exact module pinout
Where it is used
receiving card in an LED display system.
Signal path
Check transmission protocol, receiver, HUB type, driver IC, firmware and per-port loading.
Check before selecting
The specification describes this model. Receiver, module, firmware and pinout compatibility must be confirmed for the exact assembly.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Capacity modes
The specification describes this model. Receiver, module, firmware and pinout compatibility must be confirmed for the exact assembly.
Model specification · V1.1The specification describes this model. Receiver, module, firmware and pinout compatibility must be confirmed for the exact assembly.
Model specification · V1.1Additional parameters
| Parameter | Value |
|---|---|
| Exact model | HD-K12Source · V1.1 |
| Published pixel capacity | 常规芯片：192*512 PWM芯片：384*512Source · V1.1 · Manufacturer model table |
| Module interface | |
| RGB data groups | 24 RGB groupsSource · V1.1 · Manufacturer model table |
| Scanning | static~1/128Source · V1.1 · Manufacturer model table |
| Planning capacity | 98,304 pxConventional drivers; PWM maximum is listed separately.Source · V1.1 |
| Module connector | 12×HUB75ESource · V1.1 |
| Supported device classes | Huidu players, senders and processors · exact pairing requires reviewSource · V1.1 |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Before confirming a project
- Verified device pairing and firmware versions
- Port plan and exact module pinout
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
3HD-K12 factory specification
1,881 KB
Local copy of the factory PDF for reliable download; the original source is linked on the product page.
Official manufacturer product page
Official software and firmware centre
This is the manufacturer's download centre, not a package selected for this SKU. Confirm version against hardware revision and the complete system before installing.
