Colorlight S2
sending device. Up to 1 310 000 px in the stated mode. Signal-chain compatibility needs review.
- Published capacity
- 1 310 000 px
- Display outputs
- 2 ports
Purpose and capabilities
Colorlight S2 is an sending device. Published aggregate capacity: up to 1 310 000 px. DVI input; 2 × Gigabit Ethernet. Actual port and operating-mode loads need project review.
- 01S2 inputs and interfaces: DVI input; 2 × Gigabit Ethernet.
- 02Planning-mode capacity is 1310000 pixels.
- 03Pairing, firmware and module pinout must be checked for the project.
S2 in the display system
Colorlight S2 serves as a sending device in the signal chain. Published inputs and interfaces: DVI input; 2 × Gigabit Ethernet. This page describes the exact S2 variant; confirm package contents, hardware revision and availability before ordering.
Capacity and interfaces without hidden assumptions
Preliminary selection uses 1310000 pixels in the published mode. The device has 2 display outputs. Validate each output against frame rate, bit depth, operating mode and redundancy plan.
What to verify before specifying
The factory specification documents this model, not every possible device pairing. An exact quote needs sending and receiving models, hardware revisions, firmware versions, hub pinout, module drivers and port plan. Until those are reviewed, the configurator keeps the chain preliminary.
- Verified pairing with the other device and firmware
- Verified port layout and module interface
Where it is used
Building an LED display signal chain.
Signal path
Review receiving card, module pinout, firmware and port routing against the exact assembly.
Check before selecting
Published maxima do not verify the full chain, per-port load, revision or firmware of a particular project.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Capacity modes
Capacity varies with mode, frame rate, bit depth and correction features. Port routing requires review.
Model specification · V1.3Performance
| Parameter | Value |
|---|---|
| Published capacity | 1 310 000 pxSource · V1.3 |
| Display outputs | 2 portsSource · V1.3 |
Additional parameters
| Parameter | Value |
|---|---|
| Exact model | |
| Interfaces | DVI input; 2 × Gigabit EthernetSource · V1.3 |
| Maximum width | 2,560 pxSource · V1.3 |
| Maximum height | 2,560 pxSource · V1.3 |
| Display-link rate | 1 Gb/sSource · V1.3 |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Before confirming a project
- Verified pairing with the other device and firmware
- Verified port layout and module interface
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
3Official S2 specification · V1.3
V1.3 · 985 KB
Local copy of the factory PDF for reliable download; the original source is linked on the product page.
Manufacturer series page
Official software and firmware centre
This is the manufacturer's download centre, not a package selected for this SKU. Confirm version against hardware revision and the complete system before installing.
