Colorlight H10FN
optical signal transport. Signal-chain compatibility needs review.
- Optical port
- 1 ports
Purpose and capabilities
Colorlight H10FN is optical signal transport. 1 × 10G opticalCON / 10 × Gigabit Ethernet; 2 km standard optic. Validate line length and optics for the actual design.
- 01H10FN inputs and interfaces: 1 × 10G opticalCON / 10 × Gigabit Ethernet; 2 km standard optic.
- 02Pairing, firmware and module pinout must be checked for the project.
H10FN in the display system
Colorlight H10FN serves as a signal transport device in the signal chain. Published inputs and interfaces: 1 × 10G opticalCON / 10 × Gigabit Ethernet; 2 km standard optic. This page describes the exact H10FN variant; confirm package contents, hardware revision and availability before ordering.
Capacity and interfaces without hidden assumptions
Review receiving card, module pinout, firmware and port routing against the exact assembly.
What to verify before specifying
The factory specification documents this model, not every possible device pairing. An exact quote needs sending and receiving models, hardware revisions, firmware versions, hub pinout, module drivers and port plan. Until those are reviewed, the configurator keeps the chain preliminary.
- Verified pairing with the other device and firmware
- Verified port layout and module interface
Where it is used
Optical transport between control equipment and display.
Signal path
Review receiving card, module pinout, firmware and port routing against the exact assembly.
Check before selecting
Published maxima do not verify the full chain, per-port load, revision or firmware of a particular project.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Interfaces
| Parameter | Value |
|---|---|
| Optical port | 1 portsSource · V1.6 |
Additional parameters
| Parameter | Value |
|---|---|
| Exact model | H10FNSource · V1.6 |
| Interfaces | 1 × 10G opticalCON / 10 × Gigabit Ethernet; 2 km standard opticSource · V1.6 |
| 1 Gb/s Ethernet outputs | 10 portsSource · V1.6 |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
There are no confirmed pairings for this exact SKU yet. An engineer will review it.
Before confirming a project
- Verified pairing with the other device and firmware
- Verified port layout and module interface
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
3Official H10FN specification · V1.6
V1.6 · 1,834 KB
Local copy of the factory PDF for reliable download; the original source is linked on the product page.
Manufacturer series page
Official software and firmware centre
This is the manufacturer's download centre, not a package selected for this SKU. Confirm version against hardware revision and the complete system before installing.
