Colorlight 5A-75B
receiving card. Up to 131 072 px in the stated mode. Signal-chain compatibility needs review.
Purpose and capabilities
Colorlight 5A-75B is a receiving card. The documented planning mode is 131 072 px; maximum load varies with driver type and calibration. 2 × RJ45; integrated HUB75; 16 parallel RGB groups.
- 015A-75B inputs and interfaces: 2 × RJ45; integrated HUB75; 16 parallel RGB groups.
- 02Planning-mode capacity is 131072 pixels; another mode has a separate limit.
- 03Pairing, firmware and module pinout must be checked for the project.
5A-75B in the display system
Colorlight 5A-75B serves as a receiving card in the signal chain. Published inputs and interfaces: 2 × RJ45; integrated HUB75; 16 parallel RGB groups. This page describes the exact 5A-75B variant; confirm package contents, hardware revision and availability before ordering.
Capacity and interfaces without hidden assumptions
Preliminary selection uses 131072 pixels; other published modes have separate limits. Validate each output against frame rate, bit depth, operating mode and redundancy plan.
What to verify before specifying
The factory specification documents this model, not every possible device pairing. An exact quote needs sending and receiving models, hardware revisions, firmware versions, hub pinout, module drivers and port plan. Until those are reviewed, the configurator keeps the chain preliminary.
- Verified pairing with the other device and firmware
- Verified port layout and module interface
Where it is used
Building an LED display signal chain.
Signal path
Review receiving card, module pinout, firmware and port routing against the exact assembly.
Check before selecting
Published maxima do not verify the full chain, per-port load, revision or firmware of a particular project.
Technical specifications
Values include conditions and sources where available. Configured systems may differ from the base model.
Capacity modes
Capacity varies with mode, frame rate, bit depth and correction features. Port routing requires review.
Model specification · V8.3.1Capacity varies with mode, frame rate, bit depth and correction features. Port routing requires review.
Model specification · V8.3.1Additional parameters
| Parameter | Value |
|---|---|
| Exact model | 5A-75BSource · V8.3.1 |
| Interfaces | 2 × RJ45; integrated HUB75; 16 parallel RGB groupsSource · V8.3.1 |
| Planning-mode capacity | 131 072 pxOther driver modes have different capacity; see the manufacturer specification.Source · V8.3.1 |
| Display-link rate | 1 Gb/sSource · V8.3.1 |
Model reviews
Reviews relate to the model. Used equipment condition and contents must be checked separately.
Loading reviews…
Compatibility and system composition
Device relationships depend on variant, revision, firmware and operating mode.
A matching brand or connector does not prove compatibility. Electrical and logical requirements and the complete signal chain must be checked.
Engineering status
Engineering review pending; full chain unapproved
Exact-specification examples
Preliminary selection; not an installation drawing
Colorlight S20
Sender: V3.2; receiver: V8.3.1. Mode, firmware, cabinet file, pinout and port routing are unapproved.
View modelBefore confirming a project
- Verified pairing with the other device and firmware
- Verified port layout and module interface
Documents and software
Match software and firmware to the exact hardware and revision. Check the official source before installation.
Documentation
3Official 5A-75B specification · V8.3.1
V8.3.1 · 2,080 KB
Local copy of the factory PDF for reliable download; the original source is linked on the product page.
Manufacturer series page
Official software and firmware centre
This is the manufacturer's download centre, not a package selected for this SKU. Confirm version against hardware revision and the complete system before installing.
